Marshall Tufflex Voltis Home Voltage Optimisation Unit 60A VH60HD – Domestic voltage optimisation
Electricity bills keep going up and up. So Marshall Tufflex have developed Voltis Home, the easiest way to bring them down again. Not only can you save up to 17%* a year, Voltis Home also helps you to be kinder to the environment.
| Product features
-10 to 40°C
Up to 90%
300mm(w) x 240mm (h) x 147mm (d)
60Amps in Save
(100Amps in Bypass/Mains)
|Suitable for incoming voltage of||
230 – 253Volts
NB. On the rare occasion that the typical incoming voltage to a building is below 230Volts, please contact us.
How does Voltis Home work?
In the UK, voltage is supplied at around 242 volts and electrical equipment manufacturers produce products that work anywhere between 207 volts and 253 volts. The over supply is
wasted energy and not only costs money, it also causes appliances to wear out more quickly. This is because they deal with the extra voltage by generating extra heat or vibration. By installing a Voltis Home unit, voltage will typically be reduced to around 220 volts, ensuring all appliances and circuits run perfectly well - in fact at a power supply they were designed to run most efficiently at.
Incoming voltage check
Voltis Home is suitable for virtually all homes. We do however recommend electricians measure the incoming voltage prior to an installation. Should incoming voltage be below 230Volts, for further advise please contact us on +44 (0)1205 316416.
How is Voltis Home installed?
The unit is installed between the electricity meter and consumer unit. Installation is very straightforward, but must be carried out by a qualified electrician. Voltis Home will start saving money from the moment it is installed.
*Savings levels achieved will vary depending on the type of electrical appliance. 17% is calculated based on the unit reducing the voltage by 9% and the corresponding drop in kWh consumption. Savings of between 9% and 13% are typical.